logo

جزئیات محصولات

Created with Pixso. صفحه اصلی Created with Pixso. محصولات Created with Pixso.
هلیم نشت تجهیزات تست
Created with Pixso.

Air Leak Testing Equipment Pressure Decay Airtightness Tester 0.1 Pa Resolution For Valve Pipe Assemblies

Air Leak Testing Equipment Pressure Decay Airtightness Tester 0.1 Pa Resolution For Valve Pipe Assemblies

نام تجاری: HongCe
مقدار تولیدی: 1 مجموعه
شرایط پرداخت: T/T، L/C در دید، Western Union
توانایی عرضه: 40 مجموعه در هر ماه
اطلاعات دقیق
محل منبع:
گوانگدونگ، چین
گواهی:
CE, ISO 9001:2015
روشهای تست:
واپاشی فشار، فشار دیفرانسیل، پوسیدگی خلاء، تست جریان
محدوده فشار:
5 - 1000 کیلو پاسکال (0.05 - 10 بار)
وضوح سنسور:
دیفرانسیل 0.1 Pa
دقت:
+/- 0.1٪ FS
کانال های تست:
2 مستقل
ذخیره سازی برنامه:
200 برنامه، بارکد قابل انتخاب
زمان چرخه معمولی:
5 - 120 ثانیه
رابط ها:
USB، RS485، Ethernet Modbus TCP
تامین هوا:
0.6 - 0.8 مگاپاسکال بدون روغن خشک
منبع تغذیه:
AC 220 V، 50/60 هرتز، 200 W
جزئیات بسته بندی:
قاب تخته سه لا با مهاربندی داخلی، پوشش حباب هوا روی صفحه لمسی، پالت علامت گذاری شده ISPM-15
برجسته کردن:

Pressure Decay Airtightness Tester

,

Dry Air Leak Testing Equipment

,

Differential Pressure Leak Measurement

توضیحات محصول
Sensor resolution 0.1 Pa differential Pressure range 5–1000 kPa Channels 2 independent Cost per test Compressed air only Most parts that need a leak test do not need helium. They need a number, a repeatable verdict and a cost per test close to zero. This is the machine for that band of work: dry compressed air, differential measurement against a master part, two independent channels, and a controller that refuses to blame the part when the fixture is at fault. This machine is